<mark id="aklni"></mark>

    <span id="aklni"></span>
      Products Company
      Five Axis Machining Center JLU-800



      • Gantry-type machine structure allows large workpieces to be machined with high accuracy and smoothness.
      • 5 axis simultaneous machining makes the machine excellent for complex workpiece machining with only one setup.
      • High speed tilting rotary table.
      • 15,000 rpm buit-in type high speed spindle.
      • Heavy duty roller type linear guideways on X / Y / Z axes.
      • Rapid traverse rates on 3 axes can reach 48 m/min for reducing non-cutting time while increasing productivity.
      • Equipped with a 64-tool magazine.
      • Heidenhain TNC 640 CNC controller.
      Model JLU-800
      Travel X axis Travel 800 mm
      Y axis Travel 1245 mm
      Z axis Travel 620 mm
      Distance from Spindle Nose to Table Surface 100~720 mm
      Work Table Work Table Dimension 800 mm
      Max. Table Load(kgs)(Level/Tilt) 1000/500 kg
      T-slot (No.×Slot width×Dist) 7×14×100 mm
      Spindle Spindle 12000 rpm Built-in
      Spindle Taper HSK A63
      Spindle kW 21/25kW
      A axis TILTING AXIS(A axis) D.D.M.
      Tilting Angle -120°~+30°
      Max. Speed 50 rpm
      Minimum Split Angle 0.001°
      C axis Rotary Table C axis D.D.M.
      Rotating Angle 360°
      Max. Speed 100 rpm
      Minimum Split Angle 0.001°
      Taper Type HSK A63/32T
      Max. Tool Dimension Partial Load/Full Load 125/75 mm
      Max. Tool Length 300 mm
      Max. Tool Weight 8 kg
      Feed System Rapid Feed Rate X/Y/Z 48/48/48 m/min
      Cutting Feed Rate 1~20000 mm/min

      All specifications and designs are subject to change without prior notice.

      Standard Accessories:

      1. 12,000rpm Spindle HSK A63
      2. LHL system
      3. ATC 32T
      4. TNC-640
      5. Spindle/AC axis coolant system
      6. Linear scale A/C axis
      7. Pneumatic system Airtac
      8. Spindle ring spray. Spindle outside air spray 2 outputs
      9. Spindle Coolant pump
      10. Chain type chip conveyor
      11. Water gun
      12. Air gun

      Optional Accessories:

      1. 15,000 rpm Spindle
      2. ATC BBT40/CAT40/DIN40
      3. ATC 24T/32T/48T/60T/64T/96T/120T
      4. Controller 840 DSL
      5. Tool length measurement
      6. Work piece measurement Renishaw/Heidenhain
      7. CTS 30/70 bar
      8. Spindle ring spray. Spindle outside air spray 4 outputs
      9. Pneumatic system-SMC/Mindman
      10. Linear scale X/Y/Z axis
      Back List